The right material for each challenge
Extreme heat or cold, aggressive chemicals or high tractive forces often lead to enormous load on the casting. SHB offers a wide range of high-quality materials, thereby presenting the right product for each demand.
SHB processes the following casting materials
Materials are normally manufactured as per the current standard specifications. Furthermore, we fulfil special requirements in terms of chemical analysis and mechanical-technological parameters. Modern annealing furnaces and cooling mediums are available for obtaining the desired delivery status.
We would like to advise you and help you select the right material for your requirements.
| quaranteed mechanical properties | ||||||||
|---|---|---|---|---|---|---|---|---|
| Yield strength | Tensile strength | Elongation | Charpy | |||||
| Desription | Material No. DIN | Related Standard | delivery condition | N/mm² | N/mm² | % | Kjoule ISO-V RT | |
| GE200 | 1.0420 | DIN EN 10293 | N | t<= 300mm | 200 | 380-530 | 25 | 27 |
| GE240 | 1.0446 | DIN EN 10293 | N | t<= 300mm | 240 | 450-600 | 22 | 27 |
| GE 260 | 1.0552 | DIN 1681 | N | 260 | 520-650 | 18 | 22 | |
| GE300 | 1.0558 | DIN EN 10293 | N | t<= 30mm | 300 | 600-750 | 15 | 27 |
| GP240GH (GS-C25) | 1.0619 | DIN EN 10213-2 | 240 | 420 | 22 | 27 | ||
| WCB | 1.0619 | ASTM A216-89 | 250 | 485-655 | 22 | - | ||
| G20Mn5 | 1.1120 | DIN 17182, DIN 12093, DIN EN 10213-2 | Q/T | 360 | 500-650 | 22 | 50 | |
| N | 300 | 480-620 | 20 | 50 | ||||
| A4 | BS 3100 | t<= 100mm | 175 | 500-700 | 30 | 60 | ||
| G21Mn5 | 1.1138 | SEW 685 | Q/T | t<= 100mm | 300 | 480-620 | 20 | 85 |
| N | t<= 30mm | 300 | 480-620 | 20 | 55 | |||
| G24Mn6 | 1.1118 | SEW 520, DIN 10293, DIN EN 10340 | Q/T | t<= 50mm | 550 | 700-800 | 12 | 27 (-20) |
| G28Mn6 | 1.1165 | DIN 10293 | N | t<= 250mm | 260 | 520-670 | 18 | 27 |
| Q/T | t<= 50mm | 550 | 700-850 | 10 | 31 | |||
| GS36Mn5 | 1.1167 | SEW 835 | Q/T | t<= 40mm | 600 | 830-1000 | 10 | 25 |
| G46Mn4 | 1.1159 | SEW 835 | t<= 250mm | 330 | 590 | 14 | - | |
| G37MnSi5 | 1.5124 | key to steel | Q/T | |||||
| G20Mo5 (G22Mo4) | 1.5419 | DIN EN 10213, DIN EN 10293, DIN 17245 | Q/T | t<= 100mm | 245 | 440-590 | 22 | 27 |
| G17CrMo5-5 | 1.7357 | DIN EN 10213-2, DIN EN 10293 | Q/T | 315 | 490-690 | 20 | 27 | |
| G17CrMoV5-10 | 1.7706 | DIN EN 10213-2 | Q/T | t<= 150mm | 440 | 590-780 | 15 | 27 |
| G17CrMo9-10 | 1.7379 | SEW 520, DIN 10293, DIN EN 10213 | Q/T | 400 | 590-740 | 18 | 40 | |
| G22CrMo5-4 | 1.7354 | key to steel | ||||||
| G14NiCrMo10-6 | 1.6779 | SEW 520, SEW 685 | t<= 150mm | 550 | 650-800 | 16 | 90 | |
| G18NiMoCr3-6 | 1.6759 | SEW 520, DIN EN 10340 | t<= 80mm | 700 | 830-980 | 12 | 40 | |
| G22NiMoCr5-6 | 1.6760 | SEW 520 | t<= 50mm | 950 | 1050-1200 | 10 | 40 | |
| G25CrMo4 | 1.7218 | DIN 17205 | Q/T | 345 | 540-690 | 18 | 55 | |
| G26CrMo4 | 1.7221 | SEW 685, DIN EN 10293:2005 | Q/T | t<= 100mm | 550 | 700-850 | 10 | 18 |
| G30CrMoV6-4 | 1.7725 | DIN 17205, DIN EN 10293 | Q/T | t<= 100mm | 750 | 900-1100 | 12 | 31 |
| G34CrMo4 | 1.7220 | DIN 17205 | Q/T | t<=100mm | 540 | 700-850 | 12 | 35 |
| G35CrMoV10-4 | 1.7755 | DIN 17205 | ||||||
| G42CrMo4 | 1.7321 | DIN EN 10293 | Q/T | t<=100mm | 600 | 800-950 | 12 | 31 |
| G30NiCrMo8-5 | 1.6570 | DIN EN 10293 | Q/T | t<= 100mm | 700 | 850-1000 | 16 | 50 |
| G33NiCrMo7-4-4 | 1.6740 | DIN 17205 | Q/T | t<= 100mm | 950 | 1050-1250 | 10 | 35 |
| G34CrNiMo6 | 1.6582 | DIN 17205 | ||||||
| G35CrNiMo6-6 | 1.6579 | DIN EN 10293 (06/05) | N | t<= 150mm | 550 | 800-950 | 12 | 31 |
| G90MnCrV8 | - | DIN 17350 | ||||||
| GX120Mn13 | 1.3802 | SEW 395, DIN 10349 | A | 340 | 680-780 | 30 | - | |
| GX120MnCrMo12-11 | - | works standard | ||||||
| GX120MnCr12-2 | - | works standard | ||||||
| EN-JN3 049 (GX260Cr27) | 5.5610 | DIN EN 12513 | ||||||
| EN-JN3 049 (GX300CrMo27-1) | 5.5610 | DIN EN 12513 | ||||||
| EN-JN2 049 (GX300CrNiSi9-5-2) | 5.5605 | DIN EN 12513 | ||||||
| EN-JN3 029 (GX300CrMo15-3) | 5.5608 | DIN EN 12513 | ||||||
| GX2CrNiN26-7-4 | 1.4469 | DIN EN 10213/10283 | 480 | 650-850 | 22 | 50 | ||
| GX2CrNiMoN22-5-3 | 1.4470 | DIN EN 10283, DIN EN 10213 | t<= 150mm | 420 | 600-800 | 20 | - | |
| GX2CrNiMoN18-10 | 1.4404 | SEW 410 | 205 | 440-640 | 30 | 80 | ||
| GX2CrNiMoN26-7-4 | 1.4469 | EN 10213-4, EN 10283 | t<= 150mm | 480 | 650-850 | 22 | 50 | |
| GX4CrNi13-4 | 1.4317 | DIN EN 10213-2/EN10283/EN 10293/EN 10340/SEW520 | t<= 150mm | 920 | 980-1130 | 10 | 27 | |
| GX5CrNi13-4 | 1.4313 | DIN 17445 | Q/T | t<= 150mm | 920 | 980-1130 | 10 | 27 |
| GX5CrNi19-10 | 1.4308 | DIN EN 10213-4, DIN EN 10283 | t<= 150mm | 175 | 440-640 | 30 | 60 | |
| GX5CrNiMo19-11-2 | 1.4408 | DIN EN 10213-4, DIN EN 10283 | t<= 150mm | 185 | 440-640 | 30 | 60 | |
| GX5CrNiMoNb19-11-2 | 1.4581 | DIN EN 10213/10283 | t<= 150mm | 185 | 440-640 | 25 | 40 | |
| GX6CrNiMo18-10 | 1.4408 | DIN 17445 | 185 | 440-640 | 30 | 60 | ||
| GX7CrNiMo12-1 | 1.4008 | DIN EN 10283 | 440 | 590-780 | 15 | 27 | ||
| GX8CrNi12 | 1.4107 | EN 10213-2 | 355 | 540-690 | 18 | 45 | ||
| GX8CrNi13 | 1.4008 | DIN 17445 | 440 | 590-780 | 15 | 27 | ||
| GX20Cr14 | 1.4027 | SEW 410 | 440 | 590-790 | 12 | - | ||
| GX23CrMoV12-1 | 1.4931 | DIN EN 10293, DIN EN 10213-2 | Q/T | t<=150mm | 540 | 740-880 | 15 | 27 |
| GX40CrSi17 | 1.4740 | EN 10295 | ||||||
| GX40CrNiSi25-20 | 1.4848 | EN 10295/SEW 595 | 220 | 450 | 8 | - | ||
| GX40CrNiSi25-12 | 1.4837 | EN 10295 | 220 | 450 | 6 | - | ||
| GX45CrNiW25-25-2 | - | works standard | ||||||
| GNiCrW28 | 2.4879 | DIN EN 10295, SEW 595 | 220 | 400-600 | 3 | - | ||
| 32CrMo12 | 1.7361 | EN 10250/SEW 550 | t<= 250mm | 685 | 880-1080 | 10 | 31 | |
| Duplex (GX2CrNiMoN 22-5-3) | 1.4470 | DIN EN 10213, DIN EN 10283 | 420 | >=600 | 20 | 30 | ||
| Invarstahl | 1.3912 | DIN 1715-1, DIN 17745, SEW 385 | ||||||